The hose line bursts before entry

Firefighter I · Who you talk to: The driver operator

What this case adds

• Stop the flow with a hose clamp or have the driver operator shut down the line.
• Replace the damaged section with two sections and straighten the line.
• Close the nozzle, then release the clamp slowly or have the line charged again.

Critical fails

• Entering without SCBA on air, or letting your partner enter without it.
• Starting an interior attack without two firefighters outside, unless life is in jeopardy and a rescue is needed.
• Losing voice or visual contact with your partner inside.
• Any action that compromises your safety or your team's (mandatory item in Pennsylvania's NFPA 1010 station).

Sources

1. Washington State Patrol Fire Protection Bureau, Firefighter I skill sheets (NFPA 1001, 2019 edition), skill sheets 23 to 26 https://wsp.wa.gov/wp-content/uploads/2023/01/420076_Skill-Sheets_Firefighter_I_R_1-23.pdf

Making Synapses is not affiliated with, sponsored by or endorsed by the NFPA, OSHA, the Washington State Patrol, the Pennsylvania Office of the State Fire Commissioner, IFSAC or the Pro Board. NFPA 1001 and NFPA 1010 are trademarks of their owner and are named only to describe what this mold practices; always follow your department's procedures.